snmp-trap-sink-create

This command is used to specify a SNMPv1 trap receiver for SNMP traps.

Syntax   snmp-trap-sink-create

community community-string

Specify the community name to send traps.

type TRAP_TYPE_V1_TRAP|TRAP_TYPE_V2C_TRAP|TRAP_TYPE_V2_INFORM

Specify the type of SNMP trap.

dest-host dest-host-string

Specify the destination host.

dest-port dest-port-number

Specify the destination port. The default port is 162.

Defaults   None

Access   CLI

History   

Version 2.0

Command introduced.

Version 2.4

The options, TRAP_TYPE_V3_TRAP|TRAP_TYPE_V3_INFORM deprecated.

Usage   Use this command to send SNMP traps to a receiver. You can configure up to two receivers.

Examples  To send TRAP_TYPE_V1_TRAP, from community string, snmp-group, to the destination, trap-recvr, on port 43, use the following command:

CLI (network-admin@switch) > snmp-trap-sink-create community snmp-group type TRAP_TYPE_V1_TRAP dest-host 172.21.16.0 trap-recvr dest-port 43

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south