subnet-show
To facilitate optimal east-west routing while supporting transparent virtual machine mobility, leaf switches are assigned the same gateway IP, and MAC address for each locally defined subnet. Having the same gateway IP, and MAC address helps ensure a default gateway presence across all leaf switches. It removes the suboptimal routing inefficiencies associated with separate centralized gateways.
This command allows you to display subnet configurations.
Syntax subnet-show
|
name name-string |
Name for the subnet. |
|
description description-string |
The subnet description. |
|
scope local|cluster|fabric |
The scope of the subnet. |
|
vnet vnet name |
The vNET name to assign to the subnet. |
|
vlan vlan id |
The VLAN to assign to the subnet. |
|
vxlan vlan vxlan |
The VXLAN to assign to the subnet |
|
network ip-address |
The IP address to assign to the subnet. |
|
netmask netmask |
The netmask of the IP address. |
|
anycast-gw-ip ip-addresss |
The IP address for the anycast gateway. |
|
network6 ip-address |
The IPv6 subnet address. |
|
netmask6 netmask |
The IPv6 netmask. |
|
anycast-gw-ip6 ip-address |
The IPv6 address for the anycast gateway. |
|
linklocal ip-address |
The IPv6 Link Local address. |
|
packet-relay enable|disable|none |
The packet relay as enabled, disabled, or none. |
|
forward-proto dhcp |
The forwarding packet protocol. The parameter only accepts DHCP as the protocol. |
|
forward-ip ip-address |
The IPv4 address for forwarding the packet. |
|
forward-ip2 ip-address |
The second IPv4 address for forwarding the packet. |
|
forward-ip6 ip-address |
The IPv6 address for forwarding the packet. |
|
forward-ip6-2 ip-address |
The second IPv6 address for forwarding the packet. |
|
flood enable|disable|none |
Specifies the flooding state of BUM traffic. |
|
state init|ok|vxlan not found|vxlan deactivated|not-in-hw|vrouter interface exists |
The subnet state. |
|
leaked-on leaked-on-string |
The leaked VRF list. |
|
hw-state|no-hw-state |
The subnet state in rib/fib. |
|
enable|disable |
Enable or disable the subnet. |
|
evpn-export-leaked-networks permit|deny |
Specifies the exporting leaked subnets to EVPN overlay. |
Defaults None
Access Network Administrator
History
|
Version 3.0.0 |
Command introduced. |
|
Version 3.1.0 |
The parameters network6, netmask6, anycast-gw-ip6, packet-relay, forward-proto, forward-ip, forward-ip6, and enable|disabled added. |
|
Version 5.1.0 |
The following parameters added:
|
|
Version 6.0.0 |
The parameter description added. |
|
Version 7.0.0 |
The parameter evpn-export-leaked-networks added. |
Usage Use this command to display a subnet configuration.
Examples To display a subnet configuration, sub1, use the following syntax:
CLI (network-admin@switch)1 > subnet-show name vlan-235 format name,scope,vlan,vxlan,vrf,network,state,enable,evpn-export-leaked-subnets
name scope vlan vxlan vrf network state enable evpn-export-leaked-subnets
-------- ------ ----- ------ ---- ----------- ----- ------ --------------------------
vlan-235 fabric 235 10235 vrf3 13.1.5.0/24 ok yes deny