topology-vle-add
This command is used to specifiy the vLE name to be added to a topology, the node, and the node ports between which the vLE needs to be set up.
Syntax topology-vle-add
|
name name-string |
Specify the name of the topology. |
|
vle-name vle name |
Specify the vLE name. |
|
node1 fabric-node name |
Specify the name for the first fabric node. |
|
node2 fabric-node name |
Specify the name for the second fabric node. |
|
node-1-port node-1-port-number |
Specify the port number on first node. |
|
node-2-port node-2-port-number |
Specify the port number on second node. |
|
vlan 0..4095 |
Specifies the VLAN for vLE. |
|
vxlan 0..16777215 |
Specifies the VXLAN for vLE. |
Defaults None
Access CLI
History
|
Version 7.0.0 |
Command introduced. |
Usage Use this command to add vLEs in a topology.
Examples To add vLEs in a topology, use the following syntax:
CLI (network-admin@switch) > topology-vle-add