trunk-stats-clear

This command is used to clear information about trunk statistics.

Syntax   trunk-stats-clear

Specify any of the following options:

time date/time: yyyy-mm-ddThh:mm:ss

Specifies a time for the packet count statistics using the timestamp format YYYY-MM-DDTHH:MM:SS, where:

• YYYY specifies the 4 digit calendar year;

• MM specifies the 2 digit month of the year;

• DD specifies the 2 digit day of the month;

• HH specifies the 2 digit time of the day (24H notation);

• MM specifies the 2 digit minute of the hour;

• SS specifies the 2 digit second of the minute.

start-time start-time

Specifies a start time for the packet count statistics using the timestamp format YYYY-MM-DDTHH:MM:SS, where:

• YYYY specifies the 4 digit calendar year;

• MM specifies the 2 digit month of the year;

• DD specifies the 2 digit day of the month;

• HH specifies the 2 digit time of the day (24H notation);

• MM specifies the 2 digit minute of the hour;

• SS specifies the 2 digit second of the minute.

end-time end-time

Specifies an end time for the packet count statistics using the timestamp format YYYY-MM-DDTHH:MM:SS, where:

• YYYY specifies the 4 digit calendar year;

• MM specifies the 2 digit month of the year;

• DD specifies the 2 digit day of the month;

• HH specifies the 2 digit time of the day (24H notation);

• MM specifies the 2 digit minute of the hour;

• SS specifies the 2 digit second of the minute.

duration duration

Specifies the duration in seconds.

interval duration: #d#h#m#s

Specifies the interval between statistics collection.

since-start|
no-since-start

Specifies if the statistics are collected from the start of collecting statistics.

older-than duration: #d#h#m#s

Specifies if the statistics are older than the duration in days, hours, minutes, and seconds.

within-last duration: #d#h#m#s

Specifies if the statistics are within the duration in days, hours, minutes, and seconds.

port port-list

Specifies one or more switch network data port numbers. The port number must be in the range of 1 to 64. Multiple ports can be specified as a comma-separated list of numbers or a range (-).

name name-string

Specifies the name of the trunk.

description description-string

Specifies the physical port description.

counter counter-number

Specifies the counter number.

ibytes ibytes-number

Specifies the incoming number of bytes.

ibits ibits-number

Specifies the number of incoming bits.

iUpkts iUpkts-number

Specifies the number of incoming unicast packets.

iBpkts iBpkts-number

Specifies the number of incoming broadcast packets.

iMpkts iMpkts-number

Specifies the number of incoming multicast packets.

iPauseFs iPauseFs-number

Specifies the number of incoming pause frames.

iCongDrops iCongDrops-number

Specifies the number of incoming packets dropped due to congestion.

idiscards idiscards-number

Specifies the number of incoming packets discarded.

ierrs ierrs-number

Specifies the number of incoming errors.

obytes obytes-number

Specifies the number of outgoing bytes.

obits obits-number

Specifies the number of outgoing bits.

oUpkts oUpkts-number

Specifies the number of outgoing unicast packets.

oBpkts oBpkts-number

Specifies the number of outgoing broadcast packets.

oMpkts oMpkts-number

Specifies the number of outgoing multicast packets.

oPauseFs oPauseFs-number

Specifies the number of outgoing pause frames.

oCongDrops oCongDrops-number

Specifies the number of outgoing packets dropped due to congestion.

odiscards odiscards-number

Specifies the number of outgoing discarded packets.

oerrs oerrs-number

Specifies the number of outgoing errors.

mtu-errs mtu-errs-number

Specifies the number of MTU errors.

HER-packets HER-pts-number 

Specifies the number of Head End Replicated (HER) packets.

HER-bytes HER-bytes-number

Specifies the number of Head End Replicated (HER) bytes.

HER-bits HER-bits-number

Specifies the number of Head End Replicated (HER) bits.

port-speed disable|10m|100m|1g|2.5g|10g|25g|40g|50g|100g

Specifies the port speed.

Rx-bw-th-exceed-count Rx-bw-th-exceed-count-number

Specifies the count of RX bandwidth threshold exceed events.

Tx-bw-th-exceed-count Tx-bw-th-exceed-count-number

Specifies the count of TX bandwidth threshold exceed events.

Defaults   None

Access   CLI

History   

Version 7.0.0

Command introduced.

Usage   Use this command to clear information about trunk statistics.

Examples  To clear information about trunk statistics, use the following syntax:

CLI (network-admin@switch) > trunk-stats-clear

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south