vlan-modify
This command is used to modify a VLAN or VXLAN on the network.
Syntax vlan-modify
|
id vlan-id |
Enter an identifier for VLAN. The range is from 0 through 4095. |
|
range vlan-list |
Specify a range of VLAN IDs. |
|
Specify any of the following options: |
|
|
description description-string |
Specify a description for the VLAN. |
|
vxlan vxlan-id |
Specify the VXLAN mapped to the VLAN for the tunnel. |
|
replicators vtep-group name|none |
Specify the replicator group. |
|
vnet vnet-name |
Specify the vNET assigned to this VLAN. |
|
public-vlan vlan-id |
Specify the public VLAN for the vNET VLAN. |
Defaults None.
Access CLI
History
|
Version 2.2.4 |
Command introduced. |
|
Version 2.4.1 |
The parameter vxlan and vnet added. |
|
Version 2.6.2 |
The parameter range added. |
|
Version 3.0.0 |
The parameter range deprecated. The parameter replicators added. |
Usage VLANs are used to isolate network traffic at Layer 2. Use this command to modify a VLAN.
Examples To create a modify a VLAN named finance to the name finance-2, use the following command:
CLI (network-admin@switch) > vlan-modify id 7 name finance-2