vpg-monitor-port-add
NetVisor OS allows you to club the ingress or source ports, and the destination ports into Virtual Port Groups (vPGs). The vPG construct permits you to flood the traffic that arrives at select source ports to multiple desired destination ports. You must create vPGs to configure the Pluribus Network Packet Broker solution. From NetVisor version 7.0.0 onward, you can configure monitoring ports to analyze the traffic that hits a destination VPG or bidirectional VPG. This command adds a new monitoring port to a pre-configured vPG.
Syntax vpg-monitor-port-add
|
vpg-name name-string |
Specify the name of the vPG. |
|
switch switch-name |
Specify the name of the switch. |
|
monitor-ports port-list |
Specify the monitoring ports assigned to the vPG. |
Defaults None
Access Network Administrator
History
|
Version 7.0.0 |
Command introduced. |
Usage Use this command to add monitoring ports to a vPG.
Examples To add monitoring ports to a vPG, use the following syntax:
CLI (network-admin@Leaf1) > vpg-monitor-port-add vpg-name VPG1 monitor-ports 30