NetVisor OS Command Reference 7.0.2

mac mac-address

Specify the MAC address of the vPort.

Specify up to two of the following options:

vlan vlan-id

Specify a VLAN from 0 to 4095.

vxlan vxlan-id

Specify a VXLAN from 0 to 16777215.

vnet vnet-name

Specify a vNET assigned to the vPort.

Specify at least one of the following options:

ip ip-address

Specify an IP address.

owner node-name

Specify the switch ID.

intf intf-number

Specify the interface number.

Specify any of the following options:

bd bridge-domain-name

Specify the Bridge Domain assigned to vPort.

inner-vlan 0..4095

Specify the Q-in-Q inner VLAN assigned to vPort.

public-vlan vlan-id

Specify the ID of the public VLAN.

num-ips num-ips-number

Specify the number of IP addresses for the vPort.

config-intf config-intf-number

Specify the configuration interface number.

svc-name svc-name-string

Specify the vCenter connection service name.

hostname hostname-string

Specify the host name of the switch.

entity entity-string

Specify the VM or VM Kernel device name.

power none|powered-off|powered-on|standby|suspended|unknown

Specify the vPort entry power status.

cpus cpus-number

Specify the number of CPUs assigned to the VM.

os os-string

Specify an operating system, such as CentOS or Ubuntu, on the VM.

portgroup portgroup-string

Specify the Port Group name associated with VM MAC address.

pg-vlans vlan-list

Specify the valid VLANs for the port group.

vswitch vswitch-string

Specify the vitual switch name associated with the NIC.

vs-type none|host-vs|distributed-vs|unknown

Specify the virtual switch type.

vnic-type untagged|tagged|trunked|vm-mgmt|vm-kernel|vMotion|vSAN|FTL|rep|p-NFC|r-NFC|mgmt|unknown

Specify the type of vNIC attached to the VM or VM Kernel.

rem-switch node-name

Specify the remote switch for the vPort.

hw-index hw-index-number

Specify the hardware index number.

rt-if rt-if-string

Specify the router interface.

hw-flags invalid-vlan|invalid-port

Specify the vPort hardware flags.

Version 2.2

Command introduced.

Version 2.3

The parameters num-ips, and vm-status added.

Version 2.3.1

The parameter switch-id, changed to owner.

Version 2.4

The parameters hw-index and rt-if added.

Version 2.4.1

The parameters vnet, hw-flags, and public-vlanadded. The parameter blocked-ports deprecated.

Version 2.6.2

The parameter svc-name, power, entity, portgroup, pg-vlans, vswitch, vs-type, and vnic-type added.

The parameters hypervisor vm-id, vm-name, vm-flavor, vm-status, memory, deprecated.