vrf-mroute-show
This command displays information about distrbuted multicast forwarding in a L3/VXLAN network.
Syntax vrf-mroute-show
|
type <*,G>|<*,G,V>| |
The hardware router type. |
|
srcip ip-address |
The source IP address. |
|
srcip-mask srcip-mask-number |
The source netmask. |
|
group ip-address |
The group IP address. |
|
group-mask group-mask-number |
The netmask. |
|
vnet vnet name |
The vNET name. |
|
bd bridge-domain name |
The bridge domain name. |
|
vlan vlan-id |
The VLAN ID. |
|
vrid vrid-number |
The vRouter ID. |
|
hw-group-id hw-group-id-number |
The hardware group ID. |
|
send_vnet vnet name |
The sending vNET name. |
|
send-vlan vlan-id |
The sending VLAN ID. |
|
send-bd send-bd-string |
The sending bridge domain. |
|
ports port-list |
The port list. |
|
encap-id encap-id-number |
The encapsulation ID. |
|
flags Trunk|Active |
The hardware flags. |
Defaults None
Access Network Administrator
History
|
Version 5.1.0 |
Command introduced. |
Usage Use this command to display multicast information on virtual routing, and fowarding.
Examples To display multicast routing, use the following syntax:
CLI (network-admin@switch) > vrf-mroute-show
type srcip group vnet bd vlan vrid hw-group-id send_vnet send-vlan send-bd ports encap-id flags
------- ------- --------- ---- -- ---- ---- ----------- --------- --------- ------- ----- -------- ------
<*,G,V> 0.0.0.0 225.1.1.1 10 0 0x2000009 10 none -1 Active
<*,G,V> 0.0.0.0 225.1.1.1 10 0 0x2000009 0 19 4 Active