vrouter-bfd-neighbor-flapcount-clear
Bidirectional Forwarding Detection (BFD) provides fast BFD peer failure detection times independently of all media types, encapsulations, topologies, and routing protocols BGP, EIGRP, IS-IS, and OSPF. By sending rapid failure detection notices to the routing protocols in the local router to initiate the routing table recalculation process, BFD contributes to greatly reduced overall network convergence time. This command clears the BFD neighbor flap count on a per neighbor or per VRF basis.
Syntax vrouter-bfd-neighbor-flapcount-clear
|
vrouter-name name-string |
Specifies a name for the vRouter service. |
|
Specify the following BFD arguments: |
|
|
neighbor ip-address |
Specify the neighbor IP address. |
|
vrf vrouter-vrf |
Specify a VRF name. |
Defaults None.
Access CLI
History
Usage This command is used to clear BFD neighbor flap count.
Examples To clear BFD neighbor flap count, use the following command:
CLI (network-admin@switch) > vrouter-bfd-neighbor-flapcount-clear