vrouter-bgp-neighbor-detail-show
This command displays detailed information about Border Gateway Protocol (BGP) neighbors.
Syntax vrouter-bgp-neighbor-detail-show
vrouter-name name-string |
Name of the vRouter. |
The following BGP neighbor arguments: |
|
neighbor vrouter bgp-neighbor neighbor |
The IP address of the neighbor. |
l3-port l3-port-number |
The Layer 3 port number. |
remote-as remote-as-number |
The AS number of the remote connection. |
local-as local-as-number |
The number local AS . |
remote-id ip-address |
The neighbor router ID. |
state idle|connect|active|open-sent|open-confirm|established|clearing |
The current state of the BGP session. The state can be any of the following types: • 1 — Idle • 2 — Connect • 3 — Active • 4 — OpenSent • 5 — OpenConfirm • 6 — Established |
up-for up-for-string |
The time of an active connection. |
last-read last-read-string |
The time of the last message received. |
holdtime holdtime-number (s) |
The holdtime in seconds. |
keepalive keepalive-number (s) |
The keepalive interval in seconds. |
min-adv min-adv-number (s) |
The minimum advertisement level in seconds. |
open-sent open-sent-number |
The number of open messages sent. |
open-rcvd open-rcvd-number |
The number of open messages received. |
notif-sent notif-sent-number |
The number of notification messages sent. |
notif-rcvd notif-rcvd-number |
The number of notification messages received. |
update-sent update-sent-number |
The number of update messages sent. |
update-rcvd update-rcvd-number |
The number of update messages received. |
keepalive-sent keepalive-sent-number |
The number of keepalive messages sent. |
keepalive-rcvd keepalive-rcvd-number |
The number of keepalive messages received. |
comm-attr-send-ipv4 both|standard|extended |
The type of community attribute send to this neighbor for IPv4. |
prefix-accepted-ipv4 prefix-accepted-ipv4-number |
The number of prefixes accepted for IPv4 unicast. |
comm-attr-send-ipv6 both|standard|extended |
Specifies the type of community attribute send to this neighbor for IPv6 unicast. |
prefix-accepted-ipv6 prefix-accepted-ipv6-number |
Specifies number of prefixes accepted for IPv6 unicast. |
conn-established conn-established-number |
The number of times a session has been successfully established. |
conn-dropped conn-dropped-number |
The number of times a session has failed or taken down. |
last-reset last-reset-string |
The time since the session was last reset. |
start-due start-due-number (s) |
The next start timer due in seconds. |
connect-due connect-due-number (s) |
The next connect timer due in seconds. |
Defaults None
Access CLI
History
Version 3.0.0 |
Command introduced. |
Version 5.1.3 |
The parameter l3-port added. |
Usage Use this command to display detailed information about BGP neighbors configured on a vRouter.
Examples To display all information about BGP neighbors, use the following command:
CLI (network-admin@switch) > vrouter-bgp-neighbor-detail-show