vrouter-fib-arps-show
This command is used to display information about Address Resolution Protocol (ARP) in the forwarding information database. Before using this command, the switch must be part of a fabric.
Syntax vrouter-fib-arps-show
|
vrid vrid-number |
The virtual router identifier. |
|
ip ip-address |
The IP address. |
|
if-id if-id-number |
The interface identifier. |
|
port port-number |
The port number. |
|
vnet vnet-name |
The vNET of the router. |
|
bd bridge-domain name |
The bridge domain name. |
|
vlan vlan-id |
The VLAN identifier. |
|
mac mac-address |
The MAC address. |
|
egress-id egress-id-number |
The egress identifier. |
|
flags ECMP|Trunk|route-to-if|local-subnet|hit| |
Displays hardware flags. |
Defaults None
Access CLI
History
|
Version 2.2.5 |
Command introduced. |
|
Version 2.4.1 |
The parameter vnet added. |
|
Version 2.6.2 |
Additional options added to flags, KEEP-SMAC and KEEP-TTL. |
|
Version 3.1.0 |
The parameter drop added. |
Usage Use this command to display ARP information in the forwarding information database.
Examples To display ARP information, use the following syntax:
CLI (network-admin@switch) > vrouter-fib-arps-show format all layout vertical
switch: switch
ip: 10.16.113.1
if-id: 0
vlan: 113
mac: 66:0e:94:9f:30:aa
flags:
switch: switch
ip: 10.16.113.2
if-id: 0
vlan: 113
mac: 66:0e:94:f8:74:66
flags:
switch: switch
ip: 10.16.115.1
if-id: 1
vlan: 115
mac: 66:0e:94:f8:74:66
flags: