admin-ipmi-modify
This command is used to modify parameters for the IPMI interface.
Note: This command is supported only on NRU02, NRU03, and NRU-S0301 platforms.
Syntax admin-ipmi-modify
|
any of the following options: |
|
|
enable|disable |
Specifies whether to enable or disable IPMI. |
|
addr-type static|dhcp |
Specifies the address type for the IPMI interface - static or DHCP. |
|
ip ip-address |
Specifies IP address of the IPMI interface to be modified. |
|
netmask netmask |
Specifies the netmask of the IP address. |
|
gateway-ip ip-address |
Specifies the gateway IP address. |
|
secondary-enable|secondary-disable |
Specifies whether to enable or disable secondary IPMI. |
|
secondary-addr-type static|dhcp |
Specifies the address type for the IPMI interface - static or DHCP. |
|
secondary-ip ip-address |
Specifies the secondary IP address of the IPMI interface. |
|
secondary-netmask netmask |
Specifies the secondary netmask of the IP address. |
|
secondary-gateway-ip ip-address |
Specifies the secondary gateway IP address. |
|
ipmi-password ipmi-password-string |
Specifies the IPMI password. |
Defaults None
Access CLI
History
|
Version 7.1.0 |
Command introduced. |
Usage This command is used to modify parameters for IPMI.
Examples To change the BMC NTP configuration for the IPMI interface, use the command:
CLI (network-admin@switch) > admin-ipmi-modify ntp-primary us.pool.ntp.org