admin-ipmi-show
This command is used to display parameters for the IPMI interface.
Note: This command is supported only on NRU02, NRU03, and NRU-S0301 platforms.
Syntax admin-ipmi-show
Defaults None
Access CLI
History
|
Version 7.1.0 |
Command introduced. |
Usage This command is used to display parameters for IPMI.
Examples To display parameters for the IPMI interface, use the following command:
CLI (network-admin@switch) > admin-ipmi-show
switch: nru02-01
enable: enable
addr-type: static
ip: 10.14.8.65/23
gateway-ip: 0.0.0.0
mac: 98:c5:db:44:05:34
secondary-enable: disable
secondary-addr-type: static
secondary-ip: ::/0
secondary-gateway-ip: ::
secondary-mac: 00:00:00:00:00:00
user: admin
GUID: 6fdbabfd-d0c1-81a2-943f-a4aee4c150fd
ntp-primary: pool.ntp.org
ntp-secondary: 10.135.2.13