log-system-show
This command displays information about the log system configuration.
Syntax log-system-show
|
Specify between 0, and 2 of the following options: |
|
|
start-time date/time: yyyy-mm-ddThh:mm:ss |
The start time for the log file. |
|
end-time date/time: yyyy-mm-ddThh:mm:ss |
The end time for the log file. |
|
duration duration: #d#h#m#s |
The duration of the log file. |
|
Specify any of the following options: |
|
|
program program-string |
The program type. |
|
pid pid-number |
The program identifier. |
|
name name-string |
The program name. |
|
code code-number |
The code number. |
|
level critical|error|warn|note|info |
The severity level of the event. |
|
vnet vnet-name |
The vNET name. |
|
remote_switch node name |
The name of the remote switch. |
|
user user-name |
The username. |
|
client-pid client-pid-number |
The client program identifier. |
|
client-addr ip-address |
The client IP address. |
|
port port-number |
The port number. |
|
vlan vlan-id |
The VLAN identifier. |
|
vxlan vxlan-name |
The VXLAN identifier. |
|
count number |
The count in a range from 1 to 50000. |
|
starting-point starting-point-number |
The starting point of the log audit. |
|
length length-number |
The length of the log audit. |
|
reverse| |
Specifies if the log is reverse or not reverse. |
Defaults None
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 6.0.0 |
The keyword info added to level. |
Usage Use this command to display information about the audit log.
Examples To display information about system logging, use the following command:
CLI (network-admin@pleiades25) > log-system-show format all layout vertical count 2
category:
system time: 2021-09-27,06:57:54.743025-07:00
name: tx_port_bw_th_exceed
code: 11551
level: note
port: 9
message: Egress port bandwidth threshold exceeded at port=9
category:
system time: 2021-09-27,06:59:34.747463-07:00
name: tx_port_bw_th_not_exceed