port-fec-stats-show
You can display the port FEC statistics by using this command.
Syntax port-fec-stats-show
|
time date/time: yyyy-mm-ddTHH:mm:ss |
The time of statistics collection. |
|
start-time date/time: yyyy-mm-ddTHH:mm:ss |
The start time for statistics collection. |
|
end-time date/time: yyyy-mm-ddTHH:mm:ss |
Then end time for statistics collection. |
|
duration duration: #d#h#m#s |
The duration time for statistics collection. |
|
interval duration: #d#h#m#s |
Then interval between statistics collection. |
|
since-start |
Specify statistics collection from a start time. |
|
older-than duration: #d#h#m#s |
Specify to display statistics collection older than the specified time. |
|
within-last duration: #d#h#m#s |
The within-last time for statistics collection. |
|
port port-list |
The port list to display FEC stats. |
|
BaseR-Fec-Corr |
Display the ports with the specified number of Base-R FEC packets with correction. |
|
BaseR-Fec-UnCorr |
Display the ports with the specified number of Base-R FEC packets without correction. |
|
Rs-Fec-Corr |
Display the ports with the specified number of RS FEC packets with correction. |
|
Rs-Fec-UnCorr |
Display the ports with the specified number of RS FEC packets without correction. |
|
Rs-Sym-Err |
Display the ports with the specified number of RS Sym packets with error. |
|
Rs-Bit-Err |
Display the ports with the specified number of RS Bit packets with error. |
Defaults None
Access Network Administrator
History
|
Version 6.0.1 |
Command introduced. |
|
Version 7.1.0 |
Counters Rs-Sym-Err and Rs-Bit-Err added (NRU03 and NRU-S0301). Support for port-fec-stats-show command added (NRU02 (100 GbE only)). |
Usage Use this command to display the port FEC stats.
Examples To display port FEC statistics for port 45, use the following syntax:
CLI (network-admin@switch) > port-fec-stats-show port 45 layout vertical
switch: switch
time: 15:43:20
port: 45
BaseR-Fec-Corr: 0
BaseR-Fec-UnCorr: 0
Rs-Fec-Corr: 4.78K
Rs-Fec-UnCorr: 401K
Rs-Sym-Err: 11.5K
Rs-Bit-Err: 1.01M