IGMP - IGMP Querier IP

IGMP - IGMP Querier IP

Glossary		Print Page		Document Feedback		Support & Services		Pluribus Networks		Pluribus Blog		LinkedIn		Facebook		Twitter

IGMP Querier IP

You can configure an IGMP querier IP address for a VLAN or as a global IGMP querier. The IGMP querier sends IGMP General Query messages over the network.

If you do not specify a querier IP address, then NetVisor OS uses 0.0.0.0 as the default value. There can be a unique querier IP for each VLAN, or you can configure the same Querier IP address for all the VLANs participating in IGMP snooping. The Querier IP address should have a local scope, and every switch should have a unique Querier IP address.

With a valid source IP address on IGMP Query packets, NetVisor OS adds the VLAN receiving the Query to an IGMP Snoop switch list and reflects in the output, and the IGMP queries sent to the peer switch as well. This event solicits a report from the hosts listening on the peer switch.

There are features and functions used in Arista NetVisor UNUM and Insight Analytics that are common throughout the user interface (UI). Please refer to the Common Functions section for more information on the use of these functions and features.

Selecting Manager → Layer 2 → IGMP Querier IP displays the IGMP Querier IP dashboard with a list of any existing entries.

Select the applicable Fabric from the left-hand navigation bar and the dashboard updates showing all Querier IP entries from all switches within the Fabric.

Note: If no entries exist a "No Data Exists" message is displayed. You must first configure an entry on a switch. Prerequisite settings and configuration may be required.

The dashboard displays a list of existing IGMP Querier IP entries by Fabric.

Additional parameters include: Switch, VLAN On Querier IP, and Querier IP.

Manage IGMP Querier IP Fabric Dashboard

Select the applicable switch from the fabric and the dashboard updates automatically with IGMP Querier IPsettings.

The dashboard displays a list of existing IGMP Querier IP entries from the switch.

Additional parameters include: VLAN On Querier IP and Querier IP.

Manage IGMP Querier IP Switch Dashboard

Modify IGMP Querier IP

Change settings by selecting Edit using the Cog icon.

Manage IGMP Querier IP Edit

Modify IGMP Querier IP

Enter the applicable settings to make changes to the IGMP Querier IP parameters which include:

•Querier Ip – Snooping Querier IP address.

Manage IGMP Querier IP Modify Querier IP

Click Save to continue or Cancel to return to the previous screen without making any changes.