Arista NetVisor UNUM 6.3.3

IGMP Static Group

There are features and functions used in Arista NetVisor UNUM and Insight Analytics that are common throughout the user interface (UI). Please refer to the Common Functions section for more information on the use of these functions and features.

Selecting Manager → Layer 2 → IGMP Static Group displays the  IGMP Static Group dashboard with a list of any existing entries. 

Select the applicable Fabric from the left-hand navigation bar and the dashboard updates showing all IGMP Static Group entries from all switches within the Fabric. 

Note: If no entries exist a "No Data Exists" message is displayed. You must first configure an entry on a switch. Prerequisite settings and configuration may be required.

The dashboard displays a list of existing IGMP Static Group entries by Fabric.

Additional parameters include: Switch, VLAN, Group IP, and Ports.

Manage IGMP Static Group Fabric Dashboard

Create Static IGMP Group

To create an IGMP Static Group, select Create a static IGMP group on the network.

Enter the required parameters, which include:

•Switch / FRG – (drop-down) - Select All, a switch or FRG (Fabric Resource Group).

•VLAN – Static IGMP group VLAN.

•Group Ip – Static IGMP group IP address.

•Ports – (Interactive Port Selector) - Static IGMP group ports.

Manage IGMP Create Static Group

Click Save to continue or Cancel to return to the previous screen without making any changes.

Select the applicable switch from the fabric and the dashboard updates automatically with IGMP Group settings.

The dashboard displays a list of existing IGMP Group entries from the switch. 

Additional parameters include: VLAN, Group IP, and Ports.

Manage IGMP Static Group Switch Dashboard

Delete a Static Group

Delete an entry by selecting Delete using the Cog icon.

Click OK to continue or Cancel to return to the previous screen without making any changes.