Arista NetVisor UNUM 6.3.3

Layer 3 Configuration – Routing Table

There are features and functions used in Arista NetVisor UNUM and Insight Analytics that are common throughout the user interface (UI). Please refer to the Common Functions section for more information on the use of these functions and features.

Routing Table

Selecting Manager → Layer 3 → Routing Table displays the Routing Table dashboard with a list of any existing vRouter Routing Tables. 

Select the applicable Fabric from the left-hand navigation bar and the dashboard updates showing all Routing Table entries from all switches within the Fabric. 

Note: If no entries exist a "No Data Exists" message is displayed. You must first configure an entry on a switch. Prerequisite settings and configuration may be required.

This feature table displays data based on the fabric's default Collector Switch. If no data displays in the dashboard, either select a switch from the Left-hand Navigation (LHN) pane or perform a Search by selecting an FRG (Fabric Resource Group) and a specific Attribute from the drop-down lists, as required. 

The dashboard displays a list of existing Routing Table entries by Switch and selected vRouter. Additional parameters include: Network, Netmask, Type, Interface, Next Hop, Distance, and Metric.

The Advanced Search function provides a rapid method to search across Fabrics, Fabric Resource Groups and feature Attributes.

Manager Layer 3 Routing Table Fabric Dashboard

Select the applicable switch from the fabric and the dashboard updates automatically with Routing Table settings. 

The dashboard displays a list of existing Routing Table entries by Network IP address. Additional parameters include: Netmask, Type, Interface, Next Hop, Distance, and Metric.

Manager Layer 3 Routing Table Switch Dashboard

Select the applicable vRouter from the Select vRouter drop-down list. The dashboard updates displaying the configuration of the selected vRouter.

Manager Layer 3 Routing Table Select vRouter

You select the --- All --- parameter to display all Routing Tables from every vRouter. This option exists for both Fabric and individual switches.

Manager Layer 3 Routing Table Select All vRouters

The dashboard updates displaying the configuration of the selected vRouter or all vRouters.