Using Port Buffering

Netvisor ONE enables you to display and modify the port buffering settings for the switch ports. To display the port buffering settings, use the port-buffer-settings-show command:

CLI (network-admin@Leaf1) > port-buffer-settings-show

switch: Spine1

enable: yes

interval: 1m

disk-space: 50M

To modify port buffering settings, use the port-buffer-settings-modify command:

CLI (network-admin@Leaf1) > port-buffer-settings-modify interval 2m

You can modify the buffer interval, duration, disk space, and enable or disable port buffering on the switch.

To display the port buffer, use the port-buffer-show command:

CLI (network-admin@Leaf1) > port-buffer-show

switch: Leaf1

port: 0

ingress-used-buf: 0%

ingress-used-buf-val: 0

egress-used-buf: 0%

egress-used-buf-val: 0

switch: Leaf1

port: 3

ingress-used-buf: 0%

ingress-used-buf-val: 0

egress-used-buf: 0%

egress-used-buf-val: 0

switch: Leaf2

port: 57

ingress-used-buf: 0%

ingress-used-buf-val: 0

egress-used-buf: 0%

egress-used-buf-val: 0

switch: Leaf1

port: 65

ingress-used-buf: 0%

ingress-used-buf-val: 0

egress-used-buf: 0%

egress-used-buf-val: 0

switch: Leaf2

port: 0

ingress-used-buf: 0%

ingress-used-buf-val: 0

egress-used-buf: 0%

egress-used-buf-val: 0

switch: Leaf2

port: 1

ingress-used-buf: 0%

ingress-used-buf-val: 0

egress-used-buf: 0%

egress-used-buf-val: 0