vrouter-interface-config-raprefix-add

This command is used to add Router Advertisement (RA) prefixes to a vRouter interface.

Syntax   vrouter-interface-config-raprefix-add

vrouter-name name-string

Specify the vRouter name.

nic vrouter interface nic

Specify the vRouter interface NIC.

v6-ra-prefix ip-address

Specify the IPv6 RA prefix address to include in the Router Advertisement.

prefix-netmask netmask

Specify the netmask for the prefix.

autoconf|no-autoconf

Specify if the RA prefix can be used for IPv6 autoconfiguration.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to add a RA prefix to a vRouter interface.

Examples  To add a RA prefix, use the following syntax:

CLI network-admin@switch > vrouter-interface-config-raprefix-add

vrouter-interface-config-raprefix-remove

This command is used to remove Router Advertisement (RA) prefixes from a vRouter interface.

Syntax   vrouter-interface-config-raprefix-remove

vrouter-name name-string

Specify the vRouter name.

nic vrouter interface nic

Specify the vRouter interface NIC.

v6-ra-prefix ip-address

Specify the IPv6 RA prefix address to include in the Router Advertisement.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to remove a RA prefix to a vRouter interface.

Examples  To remove a RA prefix, use the following syntax:

CLI network-admin@switch > vrouter-interface-config-raprefix-remove

vrouter-interface-config-raprefix-show

This command is used to add Router Advertisement (RA) prefixes to a vRouter interface.

Syntax   vrouter-interface-config-raprefix-show

vrouter-name name-string

Specify the vRouter name.

nic vrouter interface nic

Specify the vRouter interface NIC.

v6-ra-prefix ip-address

Specify the IPv6 RA prefix address to include in the Router Advertisement.

prefix-netmask netmask

Specify the netmask for the prefix.

autoconf|no-autoconf

Specify if the RA prefix can be used for IPv6 autoconfiguration.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to display information about a RA prefix configuration.

Examples  To display RA information, use the following syntax:

CLI network-admin@switch > vrouter-interface-config-raprefix-show