Command/Parameter

Netvisor ONE Version

trunk-modify name vxlan-loopback-trunk

Commands with parameters first supported in version 2.4

tunnel-create

Command added in version 1.2.

The option, cluster, was added to scope and the parameters, vrouter-name and peer-vrouter-name, were added in version 2.4. 

tunnel-vxlan-add

In version 1.2 the command was introduced. In version 2.4 the parameter, vxlan, was added. 

vtep-create, vtep-delete, vtep-show

Commands introduced in version 2.6.0. 

vtep-vxlan-add, vtep-vxlan-remove, vtep-vxlan-show

Commands introduced in version 2.6.0.

vrf-create, vrf-delete, vrf-modify, vrf-show, subnet-create, subnet-delete, subnet-modify, subnet-show

Commands introduced in version 3.0.0

igmp-snooping-modify vxlan|no-vxlan

Parameter introduced in version 3.1.1

vrf-multicast-modify, vrf-mroute-show

Commands introduced in version 5.1.0

vle-create, subnet-delete, subnet-modify, subnet-show

Commands introduced in version 2.5.4

vlan-create vxlan-mode standard|transparent

In version 2.5.2 the parameter vxlan-mode was added.

vlan-create auto-vxlan

In version 6.0.0 the parameter auto-vxlan was added.

mac-learning | no-mac-learning

Parameter introduced in version 6.0.0

system settings-modify riot-single-pass

Command introduced in version 6.0.0

system-settings-modify no-single-pass-flood|single-pass-flood

Command introduced in version 6.0.0

system-settings-modify no-single-pass-l2-known-multicast | single-pass-l2-known-multicast

Command introduced in version 6.0.1

isolated

VTEP parameter introduced in version 6.0.1

vsg-create|delete|modify, vsg-vrf-add|remove, vsg-network-add|remove, vsg-show, vsg-vrf-show, vsg-network-show

Commands introduced in version 6.0.1

type isolated, promiscuous

vSG parameters introduced in version 6.0.1

vsg-route-add, vsg-route-remove, vsg-route-show

Commands introduced in version 6.1.0

anycats-mac-for-forwarding/no-anycast-mac-for-forwarding

VRF parameters introduced in version 6.1.0