admin-service-modify

This command is used to modify the services on the switch.

Syntax   admin-service-modify

if if-string

Specify the interface to modify.

Specify one or more of the following options:

ssh|no-ssh

Specify if you want to connect to the switch using Secure Shell (SSH).

nfs|no-nfs

Specify if you want to use Network Files System (NFS) for the admin service.

web|no-web

Specify if you want to enable Web management.

web-ssl|
no-web-ssl

Specify if you want to use SSL and certificates for Web services.

web-ssl-port web-ssl-port-number

Specify the Web SSL port.

web-port web-port-number

Specify the port for Web management.

web-log|no-web-log

Specify if you want to turn on or off Web logging.

snmp|no-snmp

Specify if SNMP is allowed as a service.

net-api|no-net-api

Specify if APIs are allowed as a service.

icmp|no-icmp

Specify if Internet Control Message Protocol (ICMP) is allowed as a service.

Defaults   None

Access   CLI

History   

Version 1.2

Command introduced.

Version 3.0.0

The parameter, web-log|no-web-log, added.

Usage   Use this command to modify the administrative services on the switch.

Examples  To modify the admin service to enable SNMP, use the following command:

CLI network-admin@switch > admin-service-modify if eth.0 scope fabric snmp


 

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south