igmp-snooping-show
This command displays information about Internet Group Management Protocol (IGMP) snooping on the network.
Informational Note: Netvisor does not support IGMPv1. If you use IGMPv1, you must disable IGMP snooping on the Pluribus Networks switch
Syntax igmp-snooping-show
Defaults None
Access CLI
History Command introduced in nvOS Version 1.2.1.
Usage IGMP snooping allows the switch to listen in on IGMP traffic between hosts and routers, thus maintaining a map of the links that need IP multicast streams. Use this command to display IGMP snooping information on the switch.
Examples To display information about IGMP snooping, use the following command:
CLI network-admin@switch > igmp-snooping-show
switch: pubdev03
enable: yes
switch: pubdev02
enable: yes
switch: pubdev01
enable: yes