igmp-switches-show
This command is used to display switches with IGMP protocol enabled.
Syntax igmp-switches-show
|
node-ip ip-address |
Displays the node IP address. |
|
vnet vnet-name |
Displays the name of the VNET assigned to the IGMP static source. |
|
bd bridge-domain name |
Displays the bridge domain name. |
|
vlan vlan-id |
Displays the VLAN identifier. |
|
port port-number |
Displays the port number. |
Defaults None
Access CLI
History
|
Version 2.3.3 |
Command introduced. |
|
Version 2.4.1 |
The parameters, group-ip, node-type, expires, and source, deprecated. The parameters, vnet and vlan, added. |
|
Version 5.1.1 |
The parameter, bd, added. |
Usage Displays information about IGMP switches.
Examples To display IGMP switches, use the following syntax:
CLI network-admin@switch > igmp-switches-show
switch node-ip vlan port
-------------- ------- ---- ----
spine-1 0.0.0.0 1 3
spine-1 0.0.0.0 1 57
spine-1 0.0.0.0 2 3
spine-1 0.0.0.0 3 3