mirror-modify
This command allows you to modify a port mirror configuration.
Syntax mirror-modify
|
name name-string |
Specify the name of the mirror configuration to modify. |
|
Specify any of the following options: |
|
|
direction disabled|ingress| |
Specify the direction of the traffic that you want to mirror on the port. |
|
out-port port-list |
Specify the list of ports for outgoing network traffic. |
|
out-trunk trunk-name |
Specify the trunk name for the outgoing trunk. |
|
in-port port-list |
Specify the list of ports for incoming network traffic. |
|
filtering port|vflow-and-port| |
Specify the type of traffic to filter. |
|
enable|disable |
Enable or disable port mirroring on the network. |
|
other-egress-out allow|prevent |
Specify if other outgoing traffic is allowed or prevented. |
|
span-encap none|over-ip|over-vlan |
Specify the mirror span type. The default type is none. |
|
span-local-ip ip-address |
Specify the local IPv4 address for the mirror span. |
|
span-remote-ip ip-address |
Specify the remote IPv4 address fpr the mirror span. |
|
span-src-mac mac-address |
Specify the source MAC address for the mirror span. |
|
span-dst-mac mac-address |
Specify the destination MAC address for the mirror span. |
|
span-tagging-vlan vlan-id |
Specify the mirror span VLAN tagging ID. The default value is none. |
|
span-tos integer |
Specify the mirror span ToS from 0 to 255. The default value is 0. |
|
nvie-mirror|no-nvie-mirror |
Specify to mark this mirroring as an NVIE mirror and mirror traffic to NVIE VM. |
Defaults None.
Access CLI
History
|
Version 1.2 |
port-mirror-modify introduced. |
|
Version 2.0 |
Command changed to mirror-modify. |
|
Version 2.1 |
The parameter, out-trunk, added. |
|
Version 2.2.2 |
The parameter, direction, added. |
|
Version 2.2.3 |
The parameter, policy, changed to filtering. The parameter other-egress-out added. j |
|
Version 2.4 |
The parameter, span-, introduced. |
|
Version 2.6.2 |
The parameter, nvie-mirror, added. |
Usage Port mirroring is used to send copies of network traffic on one port to a network monitoring connection on another port. You can use this command to enable or disable port mirroring as well as designate the ports to use for it.
Examples To enable port mirroring on outbound ports 3-5 and inbound ports 8-9, use the following command:
CLI network-admin@switch > mirror-modify out-port 3-5 in-port 8-9 mirroring