port-egress-show
You can use this command to display information about fabric communications when a connection error occurs while using show commands.
Syntax port-egress-show
|
port port-list |
Displays the physical port list. |
|
egress port-list |
Displays allowed egress ports. |
|
rx-only port-list |
Displays receive only ports. |
|
active-active-vlags port-list |
Displays active-active VLAG ports. |
|
loopback port-list |
Displays loopback ports. |
|
mir_prevent_out port-list |
Displays ports not participating in mirroring traffic. |
|
no-local-switching port-list |
Displays ports that are impacted by the no-local-switching command |
Defaults None
Access CLI
History
|
Version 2.3 |
Command introduced. |
|
Version 2.5.3 |
The optional parameter, local-switching|no-local-switching, added. |
|
Version 2.6.2 |
The parameter, local-switching, deprecated. |
Usage Occasionally, the fabric returns a communication error when show commands are executed at the CLI. This command displays communication on fabric ports.
Examples To use this command, use the following syntax:
CLI network-admin@switch > port-egress-show
switch port egress rx-only active-active-vlags loopback mir_prevent_out
-------- ---- ---------- ------- ------------------- -------- ---------------
pubdev03 1 1-65,67-72 none none none 66
pubdev03 2 1-65,67-72 none none none 66
pubdev03 3 1-65,67-72 none none none 66
pubdev03 4 1-65,67-72 none none none 66
pubdev03 5 1-65,67-72 none none none 66
pubdev03 6 1-65,67-72 none none none 66
pubdev03 7 1-65,67-72 none none none 66
pubdev03 8 1-65,67-72 none none none 66
pubdev03 9 1-65,67-72 none none none 66
pubdev03 10 1-65,67-72 none none none 66
...
Informational Note: The port egress values may vary from platform to platform.