port-lacp-modify
This command allows you to run a port configured with LACP in test mode.
Syntax port-lacp-modify
|
port port-list |
Specifies the switch network data port number, list of ports, or range of ports. Port numbers must be in the range of 1 to 64. |
|
test-mode none|no-tx|no-rx|no-rx-or-tx |
Specify the test mode for the port. |
Defaults None
Access CLI
History Command introduced in Version 1.2.2.
Usage Use this command to modify a port and run it in test mode.
Examples To modify port 54 and place it in test mode, no-tx, use the following command:
CLI network-admin@switch > port-lacp-modify port 54 test-mode no-tx