Netvisor ONE Command Reference A-Z

port port-list

Specifies the switch network data port number, list of ports, or range of ports. Port numbers must be in the range of 1 to 64.

neighbor|no-neighbor

Specify to display neighbors of the LACP port.

name name-string

Specifies the name of the LACP port.

port-type none|vlag|trunk

Specifies if the port is a VLAG or a trunk.

mode off|passive|active

Specifies the mode as off, passive, or active.

timeout slow|fast

Specifies the timeout for LACP connections. Slow timeout sends requests after 30 seconds and fast timeout sends requests after 3 seconds.

system-id mac-address

Specifies the MAC address as the system ID.

lacp-key lacp-key-number

Specifies the LACP key.

system-priority system-priority-number

Specifies the system priority.

port-priority port-priority-number 

Specifies the port priority.

aggregatable yes|no

Specifies if you can aggregate the port or not.

sync yes|no

Specifies if the port is synchronized.

coll yes|no

Specifies if the port is collecting packets or not.

dist yes|no

Specifies if the port is distributing packets or not.

defaulted yes|no

Specifies if the port is defaulted or not.

expired yes|no

Specifies if the port is expired or not.

port-state port-state-number

Specifies a single port state instead of all ports.

test-mode none|no-tx|no-rx|no-rx-or-tx

Specifies if a port is in test mode.

Version 1.2.1

Command introduced.

Version 2.6.2

The parameters, lacp-key, system-priority, and port-priority added.