port-phy-config-modify
This command is used for enabling or disabling unreliable LOS configuration.
Syntax port-phy-config-modify
|
port port-list |
Specify the port list. |
|
phy_config los-unreliable |
Enable unreliable LOS configuration. |
|
phy_config_state disable|enable |
Enable or disable physical port configuration. |
Defaults None
Access Network administrator
History Command introduced in Version 6.1.0
Usage This command is used to enable or disable unreliable LOS configuration.
Examples To enable unreliable LOS configuration, use the following command:
CLI network-admin@switch > port-phy-config-modify port 49 phy_config los-unreliable phy_config_state enable
Note: This command is available only on the following platforms:
Dell: S4148T-ON, S4148-ON, S4128F-ON, S4128T-ON, S4112F-ON, S4112T-ON, S5232F-ON, S5248F-ON, Z9264, S5224F-ON, S5212F-ON
Ericsson: NRU03, NRU-S0301
Edgecore(Freedom): AS7816-64X ( F9664-C), 7726-32X (F9432-C), 7326-56X (F9476-V), 5835-54X (F9460-X)