port-phy-config-show
This command is used for displaying unreliable LOS configuration.
Syntax port-phy-config-show
|
port port-list |
Specify the port list. |
|
phy_config los-unreliable |
Enable unreliable LOS configuration. |
|
phy_config_state disable|enable |
Enable or disable physical port configuration. |
Defaults None
Access Network administrator
History Command introduced in Version 6.1.0
Usage This command is used to display unreliable LOS configuration.
Examples To display unreliable LOS configuration on port 49, use the following command:
CLI network-admin@switch > port-phy-config-show port 49
switch port phy_config phy_config_state
---------------- ---- -------------- ----------------
serpens-ptf-test 49 los-unreliable enable
Note: This command is available only on the following platforms:
Dell: S4148T-ON, S4148-ON, S4128F-ON, S4128T-ON, S4112F-ON, S4112T-ON, S5232F-ON, S5248F-ON, Z9264, S5224F-ON, S5212F-ON
Ericsson: NRU03, NRU-S0301
Edgecore(Freedom): AS7816-64X ( F9664-C), 7726-32X (F9432-C), 7326-56X (F9476-V), 5835-54X (F9460-X)