port-storm-control-modify
Use this command to modify the storm control configuration on a port.
Storm control prevents traffic on a LAN from disruption by a broadcast, multicast, or unicast storm on a port. A LAN storm occurs when packets flood the LAN, creating excessive traffic and degrading network performance.
Syntax port-storm-control-modify
|
port port-list |
Specify the port list that you want to apply storm control. |
|
Specify between one and three of the following options: |
|
|
unknown-ucast-level unknown-ucast-level- |
Specify the percentage of total available bandwidth that can be used by unicast traffic. The default value is 30%. |
|
unknown-mcast-level unknown-mcast-level- |
Specify the percentage of total available bandwidth that can be used by multicast traffic. The default value is 30%.
|
|
broadcast-level broadcast-level-string |
Specify the percentage of total available bandwidth that can be used by broadcast traffic. The default value is 30%.
|
Defaults None
Access CLI
History Command introduced in Version 2.2.3.
Usage The thresholds can either be expressed as a percentage of the total available bandwidth that can be used by the broadcast, multicast, or unicast traffic
Examples
CLI network-admin@switch > port-storm-control-modify port 11 unknown-ucast-leve 1.1
switch intf speed unknown-ucast-level unknown-mcast-level broadcast-level
------ --- ---- --------------------- ------------------- ----------------
pl-12 11 10g 1.1% 2.2% 3.3%