port-storm-control-show
This command is used to display information about storm control on a port.
Storm control prevents traffic on a LAN from disruption by a broadcast, multicast, or unicast storm on a port. A LAN storm occurs when packets flood the LAN, creating excessive traffic and degrading network performance.
Syntax port-storm-control-show
|
port port-list |
Specify a port or a list of ports. |
Defaults None
Access CLI
History Command introduced in Version 2.2.3.
Usage Use this command to display information about ports configured for storm control.
Examples To display information about storm control, use the following syntax:
CLI network-admin@switch > port-storm-control-show port 11
switch intf speed unknown-ucast-level unknown-mcast-level broadcast-level
------ --- ---- --------------------- ------------------- ----------------
pl-12 11 10g 1.1% 2.2% 3.3%