subnet-show
To facilitate optimal east-west routing while supporting transparent virtual machine mobility, leaf switches are assigned the same gateway IP and MAC address for each locally defined subnet. Having the same gateway IP and MAC address helps ensure a default gateway presence across all leaf switches. It removes the suboptimal routing inefficiencies associated with separate centralized gateways.
This command allows you to display subnet configurations.
Syntax subnet-show
|
name name-string |
Specify the name for the subnet. |
|
description description-string |
Specify the subnet description. |
|
scope local|cluster|fabric |
Specify the scope of the subnet. |
|
vnet vnet name |
Specify the VNET name to assign to the subnet. |
|
vlan vlan id |
Specify the VLAN to assign to the subnet. |
|
vxlan vlan vxlan |
Specify the VXLAN to assign to the subnet |
|
network ip-address |
Specify the IP address to assign to the subnet. |
|
netmask netmask |
Specify the netmask of the IP address. |
|
vrf vrf name |
Specify the VRF to assign to the subnet. |
|
anycast-gw-ip ip-addresss |
Specify the IP address for the anycast gateway. |
|
network6 ip-address |
Specify the IPv6 subnet address. |
|
netmask6 netmask |
Specify the IPv6 netmask. |
|
anycast-gw-ip6 ip-address |
Specify the IPv6 address for the anycast gateway. |
|
packet-relay enable|disable|none |
Specify the packet relay as enabled, disabled, or none. |
|
forward-proto dhcp |
Specify the forwarding packet protocol. The parameter only accepts DHCP as the protocol. |
|
forward-ip ip-address |
Specify the IPv4 address for forwarding the packet. |
|
forward-ip2 ip-address |
Specify the second IPv4 address for forwarding the packet. |
|
forward-ip6 ip-address |
Specify the IPv6 address for forwarding the packet. |
|
forward-ip6-2 ip-address |
Specify the second IPv6 address for forwarding the packet. |
|
enable|disable |
Enable or disable the subnet. |
Defaults None
Access Network Administrator
History
|
Version 3.0.0 |
Command introduced. |
|
Version 3.1.0 |
The parameters, network6, netmask6, anycast-gw-ip6, packet-relay, forward-proto, forward-ip, forward-ip6, and enable|disabled added. |
|
Version 5.1.0 |
The following parameters added: • forward-ip2 • forward-ip6-2 ip-address |
|
Version 6.0.0 |
The parameter, description, added. |
Usage Use this command to display a subnet configuration.
Examples To display a subnet configuration, sub1, use the following syntax:
CLI network-admin@switch1 > subnet-show name sub1
switch name description scope vnet vlan vrf packet-relay forward-proto state enable
switch1 sub1 fabric sam 4004 vrf1 disable dhcp not-in-hw yes