switch
This command is used to login remotely to another switch in the fabric.
Syntax switch switch-name name-string id switch-id command
|
switch-name name-string |
Specify the name of the switch in the fabric. |
|
id switch-id |
Specify the identifier of the switch. |
|
command |
Specify the command and arguments to execute on the remote switch. |
Defaults None.
Access CLI
History Command introduced in nvOS Version 1.2.1.
Usage The Command Line Interface (CLI) can be used to login remotely from any switch to another switch in the fabric. Use this command to remotely log into another switch and execute commands on it.
Examples To log into switch-ops from switch-eng, use the following command:
CLI (network-admin@switch-eng)> switch name switch-ops
To log into switch-ops and execute the command node-info, use the following command:
CLI (network-admin@switch-eng) > switch name switch-ops node-info
Name: switch-ops
fab-name: pn-fab
mgmt-ip: 10.10.10.7/16
mgmt-vlan: 0
out-port: 0
version: 1.2.2633,pn-nvos-b144a-kvm
state: enabled
ports: 72