tunnel-modify
This command is used to modify an existing tunnel on the switch.
Syntax tunnel-modify
|
name name-string |
specify a tunnel name. |
|
bfd|no-bfd |
Specify BFD for the tunnel. |
|
mac-learning|no-mac-learning |
Specify if you want to enable or disable MAC address learning. |
Defaults None.
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.1 |
The parameters, type and remote-switch, deprecated. |
|
Version 2.2.3 |
The parameter router-if replaced name-string with vrouter-hw-if name option. |
|
Version 3.0.0 |
The parameter, vrouter-if, deprecated. The parameter, bfd, added. |
|
Version 6.0.0 |
The parameter, mac-learning, added. |
Usage Tunnels are used to encapsulate unsupported protocols on a network. Use this command to modify tunnels on a fabric.
Examples To enable mac-learning for a tunnel, use the following command:
CLI network-admin@switch > tunnel-modify name tunnel010 mac-learning