vport-stats-show
This command is used to display vPort statistics including the number of incoming and outgoing packets.
Syntax vport-stats-show
|
time date/time: yyyy-mm-ddThh:mm:ss |
Specifies a point in tjme for displaying historical information. |
|
start-time date/time: yyyy-mm-ddThh:mm:ss |
Specifies the start time for vPort history collection. |
|
end-time date/time: yyyy-mm-ddThh:mm:ss |
Specifies the end time for vPort history collection. |
|
duration duration: #d#h#m#s |
Specifies the duration to collect the vPort history. |
|
interval duration: #d#h#m#s |
Specifies the intervals to collect vPort history. |
|
since-start |
Specifies to display all of the vPort history since collection began on the fabric. |
|
older-than duration: #d#h#m#s |
Specifies to display vPort information older than a specific duration. |
|
within-last duration: #d#h#m#s |
Specifies to display vPort information with a specific duration. |
|
switch-id node name |
Specifies the switch ID for collecting vPort statistics. |
|
hostname hostname-string |
Specifies the host name statistics. |
|
ip ip-address |
Specifies IP address statistics. |
|
mac mac-address |
Specifies the MAC address assigned to the vPort. |
|
vnet vnet name |
Specifies VNET statistics. |
|
bd bridge-domain-name |
Bridge Domain connections. |
|
vlan vlan-id |
Specifies VLAN statistics. Range is 0..4095. |
|
vxlan vxlan-id |
Specifies VXLAN statistics. Range is 0..16777215. |
|
entity entity-string |
Specifies the VM or VM Kernel device name. |
|
vnic-type untagged|tagged|trunked|vm-mgmt|vm-kernel|vMotion|vSAN|FTL| rep|p-NFC|r-NFC|mgmt|unknown |
Specifies the vNic attached to VM traffic type. |
|
vs-type none|host-vs|distributed-vs|unknow |
Specifies the Virtual Switch type |
|
ibytes ibytes-number |
Specifies number of incoming bytes. |
|
ipkts ipkts-number |
Specifies number of incoming packets. |
|
idiscards idiscards-number |
Specifies number of incoming packets discarded. |
|
ierrs ierrs-number |
Specifies number of incoming packets with errors.. |
|
obytes obytes-number |
Specifies number of outoing bytes. |
|
opkts opkts-number |
Specifies number of outoing packets. |
|
odiscards odiscards-number |
Specifies number of outgoing packets discarded. |
|
oerrs oerrs-number |
Specifies number of outgoing packets with errors. |
|
count count-number |
Specifies the statistics count. |
Defaults None
Access CLI
History .
|
Version 2.3 |
Command introduced. |
|
Version 2.4.1 |
The parameter, count, added. |
|
Version 2.5.4 |
The parameters, entity, vnic-type, and vs-type added. |
Usage Use this command to display vPort statistics.
Examples To generate a report, use the following syntax:
CLI network-admin@switch > vport-stats-show