vrf-mroute-show

This command displays information about distrbuted multicast forwarding in a L3/VXLAN network.

Syntax   vrf-mroute-show

type <*,G>|<*,G,V>|

Displays the hardware router type.

srcip ip-address

Displays the source IP address.

srcip-mask srcip-mask-number

Displays the source netmask.

group ip-address 

Displays the group IP address.

group-mask group-mask-number

Displays the netmask.

vnet vnet name 

Displays the vNET name.

bd bridge-domain name 

Displays the bridge domain name.

vlan vlan-id

Displays the VLAN ID.

vrid vrid-number

Displays the vRouter ID.

hw-group-id hw-group-id-number

Displays the hardware group ID.

send_vnet vnet name 

Displays the sending vNET name.

send-vlan vlan-id 

Displays the sending VLAN ID.

send-bd send-bd-string 

Displays the sending bridge domain.

ports port-list 

Displays the port list.

encap-id encap-id-number

Displays the encapsulation ID.

flags Trunk|Active

Displays the hardware flags.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 5.1.0.

Usage   Use this command to display multicast information on virtual routing and fowarding.

Examples  To display multicast routing, use the following syntax:

CLI network-admin@switch > vrf-mroute-show

type    srcip   group     vnet bd vlan vrid hw-group-id send_vnet send-vlan  send-bd ports encap-id flags

------- ------- --------- ---- -- ---- ---- ----------- --------- ---------  ------- ----- -------- ------

<*,G,V> 0.0.0.0 225.1.1.1 10 0 0x2000009 10                                           none  -1      Active

<*,G,V> 0.0.0.0 225.1.1.1 10 0 0x2000009 0                                             19    4      Active

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south