vrf-show
Virtual Routing and Forwarding (VRF) is a technology that virtualizes the hardware routing capabilities of a vRouter or a Layer 3 switch and offers per logical instance dedicated control and data planes. This command displays a VRF configuration.
Syntax vrf-show
|
name name-string |
Displays the VRF name. |
|
vnet name-string |
Displays the name of the vNET. |
|
scope local|cluster|fabric |
Displays the scope of the VRF. |
|
vrf-gw ip-address |
Displays an IPv4 address for the gateway. |
|
vrf-gw2 ip-address |
Displays a second IPv4 address for the gateway. |
|
vrf-gw-ip6 ip-address |
Displays an IPv6 address for the gateway. |
|
vrf-gw2-ip6 ip-address |
Displays a second IPv6 address for the gateway. |
|
l3-vni 0..16777215 |
Displays the L3 VNI |
|
active yes|no |
Displays the status of the VRF. |
|
hw-router-mac mac-address |
Displays the MAC address of the vRouter. |
|
hw-vrid number |
Displays the vRouter ID as a number from 1 to 15. |
|
enable|disable |
Enable or disable VRF. |
|
description description-string |
Displays the VRF description. |
Defaults None
Access Network Administrator
History Command introduced in Version 6.1.0.
|
Version 3.1.0 |
Command introduced. |
|
Version 6.0.0 |
The parameter, description, added. |
|
Version 6.1.0 |
The parameter, l3-vni, added. |
Usage Use this command to display information about a VRF configuration.
Examples To display information about a VRF configuration, use the following syntax:
CLI (network-admin@switch) > vrf-show format name,vnet,anycast-mac,l3-vni,active,hwrouter-mac,hw-vrid,flags,enable
name vnet anycast-mac l3-vni active hw-router-mac hw-vrid flags enable
---- ---- ----------------- ------ ------ ----------------- ------- ------ ------
VRF1 0:0 64:0e:94:40:00:02 101000 yes 66:0e:94:48:68:a7 1 subnet yes