vrouter-ospf-remove
This command is used to remove an OSPF configuration from a vRouter service on a fabric, cluster, virtual network (VNET), or standalone switch.
Syntax vrouter-ospf-remove
|
vrouter-name name-string |
Specify the name of the vRouter. |
|
Specify the following OSPF arguments: |
|
|
network ip-address |
Specify the network IP address. |
Defaults None
Access CLI
History Command introduced in nvOS Version 1.2.1.
Usage Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command removes OSPF for an existing Router service.
Examples To remove ospf-route from the vRouter, MyvService, use the following command:
CLI network-admin@switch > vrouter-ospf-remove vrouter-name MyvService name ospf-route