vrouter-ospf-show
This command displays information about OSPF on a virtual router (vRouter) service for a fabric, cluster, virtual network (VNET), or standalone switch.
Syntax vrouter-ospf-show
|
vrouter-name name-string |
Specify the name of the vRouter. |
|
Specify the following OSPF arguments: |
|
|
network ip-address |
Specify the network IP address. |
|
netmask netmask |
Specify the netmask of the IP address. |
|
ospf-area ospf-area-number |
Specify the OSPF area number in dotted decimal format. |
Defaults None.
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.1 |
The parameters, stub-area and stub-type, added. |
|
Version 2.2.3 |
The parameters, stub-area and stub-type, moved to the command vrouter-ospf-area. |
Usage Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command displays OSPF for an existing Router service.
Examples To display information about all OSPF instances configured on vRouters, use the following command:
CLI network-admin@switch > vrouter-ospf-show layout vertical