vrouter-route-map-show

This command is used to display route maps for BGP and OSPF vRouter configurations.

Syntax   vrouter-route-map-show

vrouter-name name-string

Specify the name of the vRouter.

name name-string

Specify the name of the route map.

seq number

Specify the sequence number to assign to the route map. This is a value between 1 and 4294967295.

action permit|deny

Specify the route map to permit or deny packets.

match-prefix prefix-list-name

Specify the prefixes used to match.

match-community match-community-string

Specify the community string to match. (BGP only)

exact-match|no-exact-match

Specify if the community string is an exact match or not. (BGP only)

community-attribute unset|none|no-export|no-advertise|
internet|local-AS

Specify the community attribute. If you specify a community attribute, you cannot add a generic community attribute as well.

community-attribute-generic community-attribute-generic-string

Specify a generic community attribute such as AA:NN. (BGP only)

additive|no-additive

Specify if a given community is appended to existing communities value.

comm-list-del vrouter community-list name 

Specify if you want to remove community values from BGP community attributes

local-pref integer

Specify a local preference. This is a value between 1 and 4294967295.

metric none

Specify a metric for the route map.

metric-type 1|2

Specify the metric type as 1 or 2.

as-path-prepend integer

Specify an integer from 1 to 4294967295.

as-path-prepend-last-as integer

Specify an integer from 1 to 10.

as-path-exclude integer

Specify an integer from 1 to 4294967295.

origin none|egp|igp|incomplete

Specify the origin of BGP prefix:

none — Resets the origin to none.

egp — Specifies the route as a remote EGP route.

igp  — Specifies the route as a local IGP route.

incomplete — Route is of unknown heritage.

Defaults   None

Access   CLI - Network Admin

History   

Version 2.4.0

Command introduced.

Version 2.6.0

The parameters, metric and metric-type, added for OSPF. The parameters, as-path-*, added.

Version 3.0.0

The parameters for BGP communities added.

Version 3.0.3

The parameter, origin, added.

Usage   Use this command to display route maps for BGP configurations.

Examples  To display a route map on vRouter1, with the name bgp-map, use the following syntax:

CLI network-admin@switch > vrouter-route-map-show vrouter-name vRouter1 name bgp-map

vrouter-name   name    seq action match-prefix community-attribute

-------------- ------- --- ------ ------------ -------------------

vRouter1       bgp-map 75 permit prefix1       local-AS

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south