Glossary		Print Page		Document Feedback		Support & Services		Pluribus Networks		Pluribus Blog		LinkedIn		Facebook		Twitter

Using and Configuring IP ACLs

Configuring IP ACLs

From Figure 14-4 Network Example - IP ACL for Internal Servers, the following information is available:

Source IP address
Source netmask
Destination IP address
Destination netmask
Type of protocol to deny - IP
Ports
VLAN

Using a Deny IP ACL to Block Network Traffic

In this example, a network is shown with a Finance server on one part of the network, and an Engineering server on another part.

You want to block the Engineering server from the Finance server in order to protect company sensitive information.

See Configuring an Internal Deny ACL to review the configuration sample.

Figure 14-4 - Network Example - IP ACL for Internal Servers

Or, you may discover that an external source is attempting to access your network, and ping your servers for IP addresses.

You can use an ACL to block the specific source using an IP ACL.

Figure 14-5 - IP ACL Blocking External Access

See Configuring an External Deny ACL to review the configuration example.

Using IP ACLs to Allow Network Traffic

In the same manner, you can allow specific traffic to a destination such as the external server as shown in Figure 2 - IP ACL Blocking External Access.

To allow HTTP traffic to 209.225.113.24, see Configuring an External Allow IP ACL to review the configuration example.

Configuring an Internal Deny ACL

Let’s configure the ACL for denying traffic from the Engineering server to the Finance server and name the ACL, deny-finance:

CLI (network-admin@Leaf1) > acl-ip-create name deny-finance action deny scope local src-ip 192.168.10.2 src-ip-mask 24 dst-ip 192.168.200.3 dst-ip-netmask 24 proto ip src-port 55 dst-port 33 vlan 1505

To review the configuration, use the acl-ip-show command:

CLI (network-admin@Leaf1) > acl-ip-show name deny-hr layout vertical

id: b00011:20

action: deny

proto: ip

src-ip: 192.168.10.2/24

src-port: 55

dst-ip: 192.168.200.3/24

dst-port: 33

vlan: 1505

scope: local

port: 0

Now, when you attempt to access the Finance server from the Engineering server, the packets are dropped.

Configuring an External Deny ACL

From Figure 2 IP ACL Blocking External Access, you can see the following information:

IP Address
Port Number

To configure an ACL to deny traffic from the external server, use the acl-ip-create command to create an ACL named deny-external:

CLI (network-admin@Leaf1) > acl-ip-create name deny-external scope fabric src-ip 209.255.113.24/28

To review the configuration, use the acl-ip-show command:

CLI (network-admin@Leaf1) > acl-ip-show name deny-external layout vertical

id: b000022:20

action: deny

proto: tcp

src-ip: 209.225.113.24/28

src-port: 0

dst-ip: ::/0

dst-port: 0

vlan: 0

scope: fabric

port: 0

Configuring an External Allow IP ACL

To allow HTTP traffic to the external server, 209.225.113.24 with a netmask of 255.255.255.240 and a scope of fabric, you can create an IP ACL called allow-http using the following syntax:

CLI (network-admin@Leaf1) > acl-ip-create name allow-http permit scope fabric src-ip 0.0.0.0. src-ip-mask 255.255.255.255 dst-ip 209.225.113.24 dst-ip-mask 255.255.255.240 protocol tcp dst-port 57

To review the configuration, use the acl-ip-show command:

CLI (network-admin@Leaf1) > >acl-ip-show name allow-http layout vertical

id: b000025:20

action: allow

proto: tcp

src-ip: 0.0.0.0/255.255.255.255

src-port: 0

dst-ip: 209.225.113.24/28

dst-port: 57

vlan: 0

scope: fabric

port: 0

To delete the ACL configuration, use the acl-ip-delete command.

To modify the ACL configuration, use the acl-ip-modify command.