Post Installation Configuration
After installation and activation is complete you can proceed to configure the switches for your network.
The Pluribus Data Center Interconnect Validated Design Guide provides a practical guide to create validated leaf-spine architectures.
The Pluribus Networks Netvisor ONE Configuration Guide provides an authoritative guide to the many features of Netvisor ONE. Basic knowledge of the management CLI is assumed; use the Configuration Guide to review CLI syntax and structure.
The overall procedure to configure Netvisor ONE based on the Validated Design Guide is as follows:
- Review the topology and design considerations
- Redundancy requirements
- IP and VLAN scheme
- Completing the initial switch setup
- Setup wizard runs automatically upon first login (default login/password: pluribus/pluribus_password)
- Set the timezone
- Other management interface parameters may need to be configured
- Review NTP server information to be used for time sync
- Creating the ONVL Fabric
- fabric-create command or fabric-join command
- fabric-show command
For more details on configuring the Netvisor ONE features, see the Configuration Guide.