switch-route-delete
This command is used to delete the routing setup of a switch.
Syntax switch-route-delete
|
network ip-address |
Specify the destination IPv4 or IPv6 address. |
|
netmask netmask |
Specify the destination netmask. |
|
Specify one or more of the following options: |
|
|
gateway-ip ip-address |
Specify the gateway IPv4 or IPv6 address. |
|
nic switch-nic nic |
Specify the NIC. |
Defaults None.
Access CLI
History Command introduced in Version 2.3.
Usage Use this command to delete routes from one switch to another switch.
Examples
CLI (network-admin@switch) > switch-route-delete