switch-route-modify
This command is used to modify the routing setup of a switch.
Syntax switch-route-modify
|
network ip-address |
Specify the destination IPv4 or IPv6 address. |
|
netmask netmask |
Specify the destination netmask. |
|
Specify one or more of the following options: |
|
|
gateway-ip ip-address |
Specify the gateway IPv4 or IPv6 address. |
|
nic switch-nic nic |
Specify the NIC. |
|
metric integer |
Specify the metric for the route as an integer between 1 and 4294967295. |
Defaults None.
Access CLI
History
|
Version 2.3.0 |
Command introduced. |
|
Version 3.0 |
The parameter, metric, added. |
Usage Use this command to modify routes from switch to switch.
Examples
CLI (network-admin@switch) > switch-route-modify