descriptionGlossaryprintPrint PagefeedbackDocument FeedbacksupportSupport & ServicesbusinessPluribus Networksrss_feedPluribus BlogLinkedInfacebookFacebookTwitter Configuring Switch Ports This section contains information about the configuration and management of switch ports. Introduction Displaying and Configuring Port Queue Statistics Displaying Port Information Configuring Forward Error Correction Displaying Port Statistics Configuring Ports Speed Configuring Static Pre-Emphasis (Signal Integrity) Settings on Ports Configuring Port Storm Control Configuring 10/100M Override Using Bel-Fuse SFP-1GBT-05 on F9372-X Platforms Configuring Link Scan Mode Configuring Maintenance Mode Configuring Fabric and vRouter Communication via KNET Configuring Forced Port Link-up Using Port Buffering Changing Queues 8 and 9 for Control Traffic Transceiver OIR Support Enabling Jumbo Frame Support Configuring Port Rate Limit Configuring Uplink Groups Configuring Minimum and Maximum Bandwidth on Ports Configuring Port Bandwidth Monitoring Configuring CoS Queue Weights Configuration Using Port Description instead of Port Number northmenukeyboard_arrow_upkeyboard_arrow_downdescriptionprintfeedbacksupportbusinessrss_feedsouth