tunnel-modify

This command is used to modify an existing tunnel on the switch.

Syntax   tunnel-modify  

name name-string

specify a tunnel name.

bfd|no-bfd

Specify BFD for the tunnel.

mac-learning|no-mac-learning

Specify if you want to enable or disable MAC address learning.

Defaults   None.

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.1

The parameters type and remote-switch deprecated.

Version 2.2.3

The parameter router-if replaced name-string with vrouter-hw-if name option.

Version 3.0.0

The parameter vrouter-if deprecated. The parameter bfd added.

Version 6.0.0

The parameter mac-learning added.

Usage   Tunnels are used to encapsulate unsupported protocols on a network. Use this command to modify tunnels on a fabric.

Examples  To enable mac-learning for a tunnel, use the following command:

CLI (network-admin@switch) > tunnel-modify name tunnel010 mac-learning

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south