vrf-modify

Virtual Routing, and Forwarding (VRF) is a technology that virtualizes the hardware routing capabilities of a vRouter or a Layer 3 switch, and offers per logical instance dedicated control, and data planes. This command modifies a VRF configuration.

Syntax   vrf-modify

name name-string

Specify a name for the VRF.

vnet name-string

Specify the name of the vNET.

scope local|cluster|fabric

Specify the scope of the VRF.

vrf-gw ip-address

Specify an IPv4 address for the gateway.  

vrf-gw2 ip-address

Specify a second IPv4 address for the gateway.

vrf-gw-ip6 ip-address

Specify an IPv6 address for the gateway.  

vrf-gw2-ip6 ip-address

Specify a second IPv6 address for the gateway.

l3-vni 0..16777215

specify an L3 VNI.

enable|disable

Enable or disable VRF.

description description-string

Specify a VRF description.

Defaults   None

Access   Network Administrator

History  

Version 3.1.0

Command introduced.

Version 6.0.0

The parameter description added.

Version 6.1.0

The parameter l3-vni added.

Usage   Use this command to modify a VRF.

Examples  To modify VRF, blue, and a gateway address, 192.168.13.7, use the following syntax:

CLI (network-admin@switch) > vrf-modify name blue vnet red vrf-gw 192.168.13.7


north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south