vrf-show

Virtual Routing, and Forwarding (VRF) is a technology that virtualizes the hardware routing capabilities of a vRouter or a Layer 3 switch, and offers per logical instance dedicated control, and data planes. This command displays a VRF configuration.

Syntax   vrf-show 

name name-string

The VRF name.  

vnet name-string

The name of the vNET.

scope local|cluster|fabric

The scope of the VRF.

vrf-gw ip-address

An IPv4 address for the gateway.  

vrf-gw2 ip-address

The second IPv4 address for the gateway.

vrf-gw-ip6 ip-address

An IPv6 address for the gateway.  

vrf-gw2-ip6 ip-address

The second IPv6 address for the gateway.

l3-vni 0..16777215

The L3 VNI.

active yes|no

The status of the VRF.

hw-router-mac mac-address

The MAC address of the vRouter.

hw-vrid number

The vRouter ID as a number from 1 to 15.

enable|disable

Specifies to enable or disable the VRF.

description description-string

The VRF description.

Defaults   None

Access   Network Administrator

History   

Version 3.1.0

Command introduced.

Version 6.0.0

The parameter description added.

Version 6.1.0

The parameter l3-vni added.

Usage   Use this command to display information about a VRF configuration.

Examples  To display information about a VRF configuration, use the following syntax:

CLI (network-admin@switch) > vrf-show format name,vnet,anycast-mac,l3-vni,active,hwrouter-mac,hw-vrid,flags,enable

name vnet anycast-mac       l3-vni active hw-router-mac     hw-vrid flags  enable

---- ---- ----------------- ------ ------ ----------------- ------- ------ ------

VRF1 0:0  64:0e:94:40:00:02 101000 yes 66:0e:94:48:68:a7    1       subnet yes

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south