vrf-mroute-show

This command displays information about distrbuted multicast forwarding in a L3/VXLAN network.

Syntax   vrf-mroute-show

type <*,G>|<*,G,V>|

The hardware router type.

srcip ip-address

The source IP address.

srcip-mask srcip-mask-number

The source netmask.

group ip-address 

The group IP address.

group-mask group-mask-number

The netmask.

vnet vnet name 

The vNET name.

bd bridge-domain name 

The bridge domain name.

vlan vlan-id

The VLAN ID.

vrid vrid-number

The vRouter ID.

hw-group-id hw-group-id-number

The hardware group ID.

send_vnet vnet name 

The sending vNET name.

send-vlan vlan-id 

The sending VLAN ID.

send-bd send-bd-string 

The sending bridge domain.

ports port-list 

The port list.

encap-id encap-id-number

The encapsulation ID.

flags Trunk|Active

The hardware flags.

Defaults   None

Access   Network Administrator

History   

Version 5.1.0

Command introduced.

Usage   Use this command to display multicast information on virtual routing, and fowarding.

Examples  To display multicast routing, use the following syntax:

CLI (network-admin@switch) > vrf-mroute-show

type    srcip   group     vnet bd vlan vrid hw-group-id send_vnet send-vlan  send-bd ports encap-id flags

------- ------- --------- ---- -- ---- ---- ----------- --------- ---------  ------- ----- -------- ------

<*,G,V> 0.0.0.0 225.1.1.1 10 0 0x2000009 10                                           none  -1      Active

<*,G,V> 0.0.0.0 225.1.1.1 10 0 0x2000009 0                                             19    4      Active

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south